Flanges (9)

Sizes: 80mm (3"), 100mm (4") Roll groove to flange adapter. This item is used to make a connection between a Victaulic type grooved fitting and a flange. This adapter is commonly used on our water pumps to facilitate a flange...

Sizes: 50mm (2"), 65mm (2 1/2"), 80mm (3"), 100mm (4"), 125mm (5"), 150mm (6") Weld on Table E Flange Dimensions: 50mm (2")0.040m (w) x 0.150m (l) x 0.150m (h)Weight: 1.5kgCubic: 0.0009m3 65mm (2 1/2")0.00m (w) x 0.0m (l) x 0.0m...

80mm (3") ANSI 150lb slip on Weld on - 4 x Bolt Table E Flange Dimensions: 0.030m (w) x 0.190m (l) x 0.190m (h)Weight: 4.1kgCubic: 0.001083m3

Size: 50mm (2"), 65mm (2 1/2"), 80mm (3"), 100mm (4"), 150mm (6") Flange Blind - Steel Table E 80mm (3") - 4 Bolt 100mm (4"), 150mm (6") - 8 x Bolt Dimensions: 50mm (2")0.00m (w) x 0.0m (l) x 0.0m (h)Weight:...

Sizes: 50mm (2"), 65mm (2 1/2"), 80mm (3"), 100mm (4") Screw on Steel Table E Flange Dimensions: 50mm (2")0.00m (w) x 0.0m (l) x 0.0m (h)Weight: 0kgCubic: 0.00m3 65mm (2 1/2")0.030m (w) x 0.190m (l) x 0.190m (h)Weight: 2.1kgCubic: 0.001083m3...

Used to minimise water pump alignment with steel pipework and therefore minimising or eliminating vibration due to water pump  Size: 80mm (3"), 100mm (4") Rubber Joint - Rubber Bellows Table E Flange Ends Dimensions: 80mm (3")0.2m (w) x 0.2m (l)...

Sizes: 40mm (1 1/2"), 50mm (2"), 65mm (2 1/2") 80mm (3"), 100mm (4") Cast Iron Malleable Galvanised Screw on Table E Flange Dimensions: 40mm (1 1/2")0.050m (w) x 0.100m (l) x 0.100m (h)Weight: 0.700kgCubic: 0.0005m3 50mm (2")0.040m (w) x 0.150m...

Rubber full face flange gasket for Table E flanges Dimensions: 40mm (1 1/2") 0.010m (w) x 0.010m (l) x 0.100m (h)Weight: 0.200kgCubic: 0.00001m3 50mm (2") Dimensions: 0.010m (w) x 0.100m (l) x 0.100m (h)Weight: 0.100kgCubic: 0.0001m3 80mm (3") Dimensions: 0.010m...